Variant 4000kg Aluminium Ramp Pair 90231T
$1,708.00 inc GST
Variant 4000kg Aluminium Ramp Pair 90231T
4000kg Ramp pair (2500mm x 260mm)
Suitable for machinery, vehicles and equipment
Load depends on axle distance. The axle distance is between the front and rear wheels.
Straight aluminum ramps
4000 kg load per set
The access ramps are equipped with a reinforced contact surface
The access ramps should be fitted with angle brankets.
Approved approach height depends on the dimensions of the ramp set (More information under approach height)
- Many application possibilities
- Low self-weight
- Non-slip surface
- Easy to clean
- Tested for a load of 400 kg per set
- Sold in sets of 2 pieces
Our product range ranges from ramps suitable for small vehicles to the very heavy ones.
4000kg Ramp pair (2500mm x 260mm)
Suitable for machinery, vehicles and equipment
Load depends on axle distance. The axle distance is between the front and rear wheels.
Load applies to 2-axle vehicle and 1 set of ramps.
Distribution of weight with a maximum of 2/3 on one axle. The axle with the highest load must always be at the top of the ramp when driving up and down.
REMEMBER to include the weight of the driver, fuel, equipment etc
Ramps must NEVER be used as a bridge/plank, i.e. without an approach angle
For load/drive-up, please see specifications.
Safety measures:
- Always wear gloves when handling the ramps
- Only use the ramps on stable and firm ground
- Persons other than the user must keep an appropriate distance during use
- Driving up and down the ramps may only be done under the supervision of another person.
- Never use the ramps if there is visible damage
- The ramps must rest on the trailer with the entire installation surface
- The ramps must be attached to the trailer with bolts or similar.
- Maximum permitted wheel width is ramp width minus 20 mm
Additional information
| Weight | 43 kg |
|---|---|
| Brand | |
| Load / Wheelbase >1200 mm | 4000kg |
| Load / Wheelbase 750-1200 mm | 3200kg |
| Load / Wheelbase 500-750 mm | 2800kg |
| Max Load (Per Pair) | 4000kg |
| Max Loading/Driving Height | 59cm |
| Single Ramp Dimensions | 2500 x 260 x 75mm |
A2B Euro Parts is a leading provider of European trailer parts and accessories from world leading brands such as KNOTT, AL-KO, Variant, Scanvogn and Verzion.
We offer shipping Australia-wide
KNOTT Parts are used on trailers from brands such as Variant, Ifor Williams, Atlas Copco, Doosan, Nifty, and Sureweld. We stock a large number of parts in Australia ready for same day shipping.
Contact us for your parts enquiries. Our knowledgeable team are here to help you with European trailer parts.
Can't find the parts you are looking for?
We offer a parts request service. Simply tell us the part and quantity and provide the ID Plates and VIN for the trailer and we can find the parts.
